1. 2. 3. material content data sheet sales product name bsz0904nsi issued 19. february 2015 ma# MA001336212 package pg-tsdson-8-25 weight* 35.44 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 0.303 0.86 0.86 8564 8564 leadframe inorganic material phosphorus 7723-14-0 0.002 0.01 69 non noble metal zinc 7440-66-6 0.010 0.03 278 non noble metal iron 7439-89-6 0.197 0.56 5552 non noble metal copper 7440-50-8 7.988 22.54 23.14 225415 231314 wire noble metal gold 7440-57-5 0.029 0.08 0.08 824 824 encapsulation organic material carbon black 1333-86-4 0.038 0.11 1075 plastics epoxy resin - 1.963 5.54 55385 inorganic material silicondioxide 60676-86-0 17.055 48.10 53.75 481261 537721 leadfinish non noble metal tin 7440-31-5 0.395 1.12 1.12 11154 11154 plating noble metal silver 7440-22-4 0.020 0.06 0.06 573 573 solder noble metal silver 7440-22-4 0.012 0.03 342 non noble metal tin 7440-31-5 0.010 0.03 273 non noble metal lead 7439-92-1 0.463 1.31 1.37 13054 13669 heatspreader inorganic material phosphorus 7723-14-0 0.001 0.00 33 non noble metal zinc 7440-66-6 0.005 0.01 133 non noble metal iron 7439-89-6 0.094 0.27 2652 non noble metal copper 7440-50-8 3.816 10.77 11.05 107677 110495 heat sink clip inorganic material phosphorus 7723-14-0 0.001 0.00 26 non noble metal zinc 7440-66-6 0.004 0.01 103 non noble metal iron 7439-89-6 0.073 0.21 2056 non noble metal copper 7440-50-8 2.959 8.35 8.57 83501 85686 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|